When you’re satisfied with your analysis of the recording, run a test and get a report with information about it.
Run the test
To run the test you recorded, do the following:
-
Select the Run option located in the toolbar
on top of Ranorex.
- A Ranorex console window opens. If the Licensing dialog displays as well, select Continue evaluation.
The application under testing opens, and a window that controls the test loads on the bottom right of your screen.
-
Window 1 – Console
This window displays all the steps that are currently being run by the test and closes when the test ends. -
Window 2 – Application under testing
This window is the application that’s being tested, it displays the actions of the test in real-time. -
Window 3 – Test status
This window displays the status of the test run, time elapsed, progress, and what step is currently being done.
When the test finishes, the windows close, and a new tab with the report displays.
Test report
The test report contains information such as system ID, execution time, number of errors and warnings, and how many tests passed, failed, or were blocked.
In the test data on the bottom, you can see detailed information about individual steps such as if they passed or not, and how much time each step took.
Every step can be further broken down into its parts. You can observe where each action is done, and what information is validated.
If you want to check an individual step, hover your mouse cursor over it, and select the Jump to item option.
Note: If you encounter issues while running the test, refer to Solutions to Common Problems.
Congratulations, you completed your first test with Ranorex. Review the following section to learn more about Ranorex Studio, Recorder, Test Suite, and more.